• Bypass Tray
• Duplex Unit
• Only the installed trays appear on the display panel.
• Adjustment
You can select the start position for printing on a page.
Horizontal: Tray 1 to 4, Horizontal: Bypass Tray, Horizontal:Back Side
• Only the installed trays appear on the display panel.
4 Color Graphic Mode
This mode adjusts levels of toner color overlap. If characters or lines blur, setting priority on text may
make them clearer. Under normal conditions, set priority on photo.
Default: [Photo Priority]
• Text Priority
• Photo Priority
General Settings
Plain Paper Setting
You can select the type of plain paper.
• Tray 1 to 4, Bypass Tray
Default: [Plain Paper 2]
• Plain Paper 1
• Plain Paper 2
Letterhead Setting
You can select the letterhead printing mode.
• Tray 1 to 4, Bypass Tray
Default: [Letterhead 2]
• Letterhead 1
• Letterhead 2
• Letterhead 3
• Letterhead 4
• Letterhead 5
Maintenance Menu
111