Printing from a Selected Tray
If the printer does not have a tray for the selected paper size or paper type, or if the selected paper loaded
in the printer has run out, a caution message appears. If this message appears, do the following procedure.
1. When the caution message appears, press [FormFeed].
A confirmation message appears.
2. Press the [OK] key.
3. Select the tray for form feed using the [ ] or [ ] key from those that appear on the display
panel, and then press the [OK] key.
• If a tray with a smaller paper size is selected, the print job may be cut short, or other problems may
occur.
Canceling a Print Job
Follow this procedure for canceling the print job if the message prompting form feed appears.
1. Press [JobReset].
2. Press [Current].
2. Printing Documents
62
To Next Page
Loading...
