[Black Over Print:] is displayed under [Set 3] in the [Feature Sets:] list on [Printer Features] in the print dialog
box.
Separate into CMYK
Use this to select the print separation type.
You can separate the printing data into CMYK to specify a specific color combination.
The following shows where you can select this function.
[Separate into CMYK] is displayed under [Set 3] in the [Feature Sets:] list on [Printer Features] in the print
dialog box.
CMYK Simulation Profile
You can simulate the color tone of the printing ink.
You can select the printing ink from US OffsetPrint, Euroscale, JapanColor, and PaletteColor.
The following shows where you can select this function.
[CMYK Simulation Profile] is displayed under [Set 3] in the [Feature Sets:] list on [Printer Features] in the
print dialog box.
Rotate by 180 degrees
Use this to rotate the print image by 180 degrees.
The following shows where you can select this function.
[Rotate by 180 degrees] is displayed under [Set 3] in the [Feature Sets:] list on [Printer Features] in the print
dialog box.
Orientation Override
Use this to set the paper orientation.
The following shows where you can select this function.
[Orientation Override] is displayed under [Set 3] in the [Feature Sets:] list on [Printer Features] in the print
dialog box.
You can select from the following items:
• Off
• Landscape
• Portrait
8. Mac OS Configuration
206
To Next Page
Loading...
