Accessing the Extended Features
Various functions besides printing can be accessed using the [Switch Functions] key on this printer.
Use the following procedure to switch between applications. For details about using ELP NX, see Enhanced
Locked Print NX User's Guide.
1. Press the [Switch Functions] key.
2. Press the [ ] or [ ] key to select the [JavaTM/X].
3. Press the [OK] key.
4. If more than one extended feature is installed, use the [ ] or [ ] key to select the extended
feature you want to access.
5. Press the [OK] key.
• On Type 1 models, function switching is possible only when the VM card is installed.
• This manual explains the procedure for changing settings when 'Printer' is selected as the application.
1. Preparing for Printing
18
To Next Page
Loading...
