[Auto Select]: Select this setting when PLAIN, LOGIN, CRAM-MD5, or DIGEST-MD5 is
specified as the authentication method.
[Active]: Select this setting when CRAM-MD5 or DIGEST-MD5 is specified as the
authentication method.
[Inactive]: Select this setting PLAIN or LOGIN is specified as the authentication method.
3. Click [OK].
4. Click [Logout].
5. Quit Web Image Monitor.
POP before SMTP authentication
Select whether to log in to the POP3 server before sending e-mail.
1. Click [Configuration] in the menu area, and then click [E-mail] on the [Device Settings] area.
2. Make the following settings:
• POP before SMTP: Enable or disable POP before SMTP.
• POP E-mail Address: Enter the e-mail address.
• POP User Name: Enter the POP account name.
• POP Password: To set or change the POP password.
• Timeout setting after POP Auth.: Enter the time available before connecting to the SMTP
server after logging in to the POP server.
3. Click [OK].
4. Click [Logout].
5. Quit Web Image Monitor.
Sending On-demand E-mail
To use on-demand e-mail notification, perform the following configuration tasks in Web Image Monitor.
1. Click [Configuration] in the menu area, and then click [E-mail] on the [Device Settings] area.
2. Make the following settings:
• E-mail Notification E-mail Address: Enter the address using alphanumeric characters.
• Receive E-mail Notification: Specify whether to use on-demand e-mail notification.
• E-mail Notification User Name: Enter the administrator's user name as the mail originator name.
• E-mail Notification Password: Enter the password of the mail notification user.
3. Click [OK].
4. Click [Logout].
5. Quit Web Image Monitor.
Printer Status Notification by E-Mail
171
To Next Page
Loading...
