Change (HEX), Change (ASCII)
• WPA
Encryption Method (TKIP, CCMP(AES)), Authentication Method (WPA-PSK, WPA, WPA2-
PSK, WPA2)
• WPA appears only when the optional Wireless LAN interface unit is installed.
Wireless LAN Signal
You can check the signal strength when using Wireless LAN.
• This menu appears only when the optional Wireless LAN interface unit is installed.
Restore Defaults
Reset the Wireless LAN to default.
USB Settings
Select speed for USB interface.
USB Speed
Default: [Auto Select]
• Auto Select
• Full Speed
Fixed USB Port
Default: [Off]
• Level 1
• Level 2
• Off
Changing the Host Interface Menu
Follow the procedure below to change the I/O Timeout setting.
5. Making Printer Settings Using the Control Panel
150
To Next Page
Loading...
