Ricoh Aficio SP C430DN User Manual

8. Mac OS Configuration
This chapter explains how to use this printer with PostScript 3.
Using PostScript 3
The following section explains how to use the PostScript 3 printer driver.
For details about installing the PostScript 3 printer driver, see Driver Installation Guide.
Job Type
Use this to select the type of print job.
• If you are using a Type 2 model with ELP NX installed, all print jobs for which "Locked Print" is specified
are stored in ELP NX when user authentication is not set. Also note that any jobs for which "Locked
Print" is not specified will be deleted according to the default setting of ELP NX.
• For details about how to print using ELP NX, see Enhanced Locked Print NX User's Guide.
• For details about the option settings of ELP NX, consult your administrator.
The following shows the tabs or menus where you can select this function.
[Job Type:] on [Job Log] in the print dialog box.
You can select the following items:
Normal Print
Select this for normal printing. The print job starts immediately after the print command is given.
Sample Print
Use this function to print only one set of a multiple print jobs.
The other sets are saved in the printer. The saved job can be printed from the printer's control panel.
You can also delete the saved job.
• The user ID can contain up to eight alphanumeric characters (a-z, A-Z, 0-9). The password can
contain 4-8 digits.
• Entering a user ID helps you distinguish your print jobs from others.
Locked Print
Use this function to save documents in the printer memory with a password, and then edit and print
them as you want.
187
8

Ricoh Aficio SP C430DN Specifications