If Errors Occur with the Specified Paper Size and
Type
If no trays contain paper matching the specified size and type, or if the paper fed from the bypass tray
does not match the size and type specified for the print job, a message warning you of the mismatch will
appear on the control panel. Resolve the mismatch by following the message's instructions.
Changing the Paper Tray Settings
Use the following procedure to change the paper size and type specified for a tray and continue printing.
1. On the warning screen, press [Change].
The [Paper Input] screen appears.
2. Press the [ ] or [ ] key to select the tray whose paper size setting you want to change,
and then press the [OK] key.
3. Press the [ ] or [ ] key to select the paper size you require, and then press the [OK] key.
The [Paper Input] screen appears.
4. Press the [ ] or [ ] key to select the tray whose paper type you want to change, and then
press the [OK] key.
5. Press the [ ] or [ ] key to select the paper type you require, and then press the [OK] key.
The [Paper Input] screen appears.
6. Press the [Escape] key
Printing starts if the selected tray contains paper matching the size and type settings specified in the
print job.
If Errors Occur with the Specified Paper Size and Type
61
To Next Page
Loading...
