• RAM
• HDD
• SD
• SD Font Download
• When you select [RAM], you can select only fonts downloaded to the printer RAM.
• When you select [HDD], you can select only fonts downloaded to the hard disk.
• When you select [SD Font Download], you can select only fonts downloaded to the SD
card.
Font Number
Specify the ID of the default font you want to use.
Default: 0
• 0 to 63 (Resident)
• 1 to X (Download; "X" is the number of downloaded fonts)
Point Size
Specify the point size you want to use for the default font between 4 to 999.75 in 0.25 increments.
Default: 12.00 points
• This setting is effective only for a variable-space font.
Font Pitch
Specify the number of characters per inch you want to use for the default font between 0.44 to
99.99 in 0.01 increments.
Default: 10.00 pitches
• This setting is effective only for fixed-space fonts.
Symbol Set
You can specify the character set for the default font. Available sets are as follows:
Roman-8, Roman-9, ISO L1, ISO L2, ISO L5, ISO L6, ISO L9, PC-775, PC-8, PC-8 D/N,
PC-850, PC-852, PC-858, PC8-TK, PC-1004, Win L1, Win L2, Win L5, Win Baltic, Desktop,
PS Text, MS Publ, Math-8, PS Math, Pifont, Legal, ISO 4, ISO 6, ISO 11, ISO 15, ISO 17, ISO
21, ISO 60, ISO 69, Win 3.0, MC Text, UCS-2, PC-864, Arabic-8, Win Arabic, PC-866,
PC-866U, ISO Cyrillic, Win Cyrillic, PC-851, Greek-8, ISO Greek, PC-8 Greek, Win Greek,
PC-862, Hebrew-7, Hebrew-8, ISO Hebrew
Default: [PC-8]
5. Making Printer Settings Using the Control Panel
134
To Next Page
Loading...
