• Blank
Inserting a slip sheet between OHP transparencies
• Print
• Blank
• Collate cannot be set when using slip sheets.
• When the duplex printing or cover printing is set, you cannot insert slip sheets.
• The slip sheet should be the same size and orientation as the body paper.
• If "Auto Tray Select" has been set as the paper feed tray for the body paper, the paper will be delivered
from a tray containing paper in orientation. Therefore, when the slip sheet has been set to
orientation, the orientation of the output slip sheet and body paper will be different.
• The same paper feed tray cannot be set for the body of the document and slip sheets.
2. Printing Documents
44
To Next Page
Loading...
