Ricoh CX1 - Flash Exposure Compensation

106
Shooting Menu
4
You can adjust the light intensity of the flash. You can set the light
intensity from -2.0 EV to +2.0 EV in increments of 1/3 EV.
1 Display the shooting menu.
• For the operating procedure, see P.96.
2 Press the ADJ./OK button " to select [Flash Exposure
Compensation] and press the button $.
• The flash exposure compensation bar appears.
3 Press the button !" to make
the setting.
4 Press the ADJ./OK button.
• The setting appears on the screen
except when the flash mode is set to
[Flash Off].
Note ----------------------------------------------------------------------------------------------
For information on how to use the flash, see P.43.
Caution------------------------------------------------------------------------------------------
Flash exposure compensation may not work outside the flash range (GP.43).
Flash Exposure Compensation