71
Using the Fn (Function) Button
2
Assigning [AF/MF] to the Fn (Function) button (GP.169) and then
pressing the Fn button during shooting allows you to switch
between auto focus (AF) and manual focus (MF). Pressing the Fn
button switches focus modes depending on the [Focus] setting on
the shooting menu (GP.99), as shown below.
* The last selected AF mode is selected.
1
Set [Set Fn Button] to [AF/MF] on the setup menu.
• For the operating procedure, see P.169.
2
With the camera ready to
shoot, press the Fn button.
• When the focus mode changes to
manual focus, the [MF] symbol
appears at the upper right of the
screen.
Caution------------------------------------------------------------------------------------------
When [Focus] is set to [Multi-trgt AF], [Snap] or [A] (GP.99), pressing the Fn button
does not switch between AF and MF.
Note ----------------------------------------------------------------------------------------------
• For information on how to use manual focus, see P.101.
• You can also use the shooting menu to make the [Focus] setting. (GP.99)
AF/MF
[Focus] setting Press the Fn button
Multi AF Switches between [MF] and [Multi AF].
Spot AF Switches between [MF] and [Spot AF].
MF Switches between [Multi AF]
*
/[Spot AF]
*
and [MF].
Hold
To Next Page
Loading...
Need help?
General
Weight and Dimensions
