Ricoh CX1 - Changing the Text Density

80
Shooting Mode Types
3
If you are shooting with [Text Mode] in scene mode, you can use the
ADJ./OK button to change the shading of text.
You can select from [Deep], [Normal] and [Light].
1 Turn the mode dial to SCENE.
2 Press the MENU button.
• The scene mode selection screen appears.
3 Press the ADJ./OK button
!"#$ to select [Text Mode]
and then press the ADJ./OK
button.
4 Press the ADJ./OK button.
• The text density menu appears.
5 Press the ADJ./OK button !"
to select the desired density
setting.
• You can also press the shutter release
button to take the picture.
6 Press the ADJ./OK button.
• The text density setting does not appear on the screen.
Changing the Text Density
To change the setting, use the shooting menu or the ADJ./OK button. This section explains
easy ways to change the setting with the ADJ./OK button.
To use the shooting menu, see “Using the Menu” (GP.96).