70
Using the Fn (Function) Button
2
Assigning [AF/M-trgt AF] to the Fn (Function) button (GP.169)
and then pressing the Fn button during shooting allows you to
switch between auto focus and multi-target AF.
Pressing the Fn button switches focus modes depending on the
[Focus] setting on the shooting menu (GP.99), as shown below.
* The last selected AF mode is selected.
1
Set [Set Fn Button] to [AF/M-trgt AF] on the setup
menu.
• For the operating procedure, see P.169.
2
With the camera ready to
shoot, press the Fn button.
• When the focus mode changes to
[Multi-trgt AF], the symbol appears
on the screen.
Caution------------------------------------------------------------------------------------------
When [Focus] is set to [Snap], [MF] or [A] (GP.99), pressing the Fn button does not
switch between AF and Multi-target AF.
Note ----------------------------------------------------------------------------------------------
• For information on how to use multi-target AF, see P.100.
• You can also use the shooting menu to make the [Focus] setting. (GP.99)
AF/M-trgt AF
[Focus] setting Press the Fn button
Multi AF Switches between [Multi-trgt AF] and [Multi AF].
Spot AF Switches between [Multi-trgt AF] and [Spot AF].
Multi-trgt AF Switches between [Multi AF]*/[Spot AF]* and [Multi-trgt AF].
To Next Page
Loading...
