Ricoh CX1 - Dynamic Range Expansion Effect

83
Shooting Mode Types
3
Caution------------------------------------------------------------------------------------------
• The digital zoom is disabled.
• The flash cannot be used.
• Dynamic range double shot may not be effective if the shooting location is overly
bright or dark.
• When shooting a fast-moving subject, the subject may be distorted in the recorded
image.
• Flickering may be recorded as a horizontal band when shooting under fluorescent
lights.
• The settings for [Time Exposure], [Fix Minimum Aperture], and [Slow Shutter Limit]
are deactivated.
You can select from four dynamic range expansion effects, from
[Very Weak] to [Strong]. The stronger the expansion effect, the
wider the range of brightness that can be processed by the camera.
1 Turn the mode dial to Q.
2 Display the shooting menu.
• For the operating procedure, see P.96.
3 Press the ADJ./OK button " to
select [Dynamic Range
Expansion] and press the
button $.
4 Press the button !" to select
the setting and then press the
ADJ./OK button.
Dynamic Range Expansion Effect