Ricoh CX1 - Shifting the AF Target for Macro Shooting

68
Using the Fn (Function) Button
2
You can shift the AF target without moving the camera to take a
close-up picture. You can lock the focus (
GP.36) at the position
where the macro target is shifted and shoot the picture. This is
particularly useful when you are using a tripod to take pictures.
1 Set [Set Fn Button] to [Macro Target] on the setup
menu.
• For the operating procedure, see P.169.
2 With the camera ready to
shoot, press the Fn button.
• The macro target shift screen
appears.
3 Press the ADJ./OK button
!"#$ to move the cross-
mark to the desired target
position.
4 Press the ADJ./OK button.
• Pressing the DISP. button cancels the macro target shift function.
5 Half-press the shutter release button.
• The camera focuses on the area at the position of the cross-mark.
6 Gently press the shutter release button all the way.
• Pressing the ADJ./OK button toward N (Macro) cancels the macro
target shift function.
Note ----------------------------------------------------------------------------------------------
If the AE/AF target shift function is activated using the ADJ./OK button (GP.64) and
not canceled, the AE/AF target shift function cannot be used by pressing the Fn button.
Shifting the AF Target for Macro Shooting
Select Ok