Ricoh CX1 - Focus Bracketing

110
Shooting Menu
4
Contrast, Sharpness and Color Depth During
Color Bracket Shooting -------------------------------------------------------------------
During color bracket shooting, the contrast, sharpness, and color depth values set in
[Image Settings] are applied. However, the values for [Normal] in [Image Settings] apply
when [Image Settings] is set to [Black & White] or [Sepia].
With focus bracketing, the camera automatically takes 5
consecutive pictures while adjusting the focus in the following order.
You can also adjust the interval of the focus position.
First picture:
The focus position is measured according to the [Focus]
(GP.99) setting.
Second and third pictures:
The focus position is closer than that in the first picture.
Fourth and fifth pictures:
The focus position is farther than that in the first picture.
Note ----------------------------------------------------------------------------------------------
• When [Focus] is set to [MF], the first picture is taken at the set focus position without
being measured.
• [White Balance] functions according to the [Auto] setting even if it is set to [Multi-P
AUTO].
1 Display the shooting menu.
• For the operating procedure, see P.96.
2 Press the ADJ./OK button "
to select [Auto Bracket] and
press the button $.
3 Press the button !" to select
[FOCUS-BKT] and press the
button $.
4 Press the ADJ./OK button #$ to set the interval of the
focus position.
Focus Bracketing