Ricoh CX1 - Saving Images You Want to Quickly Display (Flag Function Setting); Setting;Canceling One File at a Time

136
Playback Menu
6
You can set useful image files, such as a train time table or a map,
to [Flag Function Setting], and then press the Fn (Function) button
during playback to easily display these files whenever you like. Up
to three files can be saved with [Flag Function Setting].
1 Press the 6 (Playback) button.
2 Press the ADJ./OK button !"#$ to display the file you
want to set or cancel.
3 Press the MENU button.
• The playback menu appears.
4 Check that [Flag Function
Setting] is selected and press
the ADJ./OK button $.
• The [Flag Function Setting] screen
appears.
5 Make sure that [Set] is selected
to save a file or [Cancel] is
selected to cancel a file, and then press the ADJ./OK
button.
• When a file is set, the symbol appears on the screen.
• If three files have already been set, no more files can be set.
Note ----------------------------------------------------------------------------------------------
If an enlarged still image is set, the magnification ratio and magnified area are saved and
the enlarged image can be displayed as is.
Saving Images You Want to Quickly
Display (Flag Function Setting)
Setting/Canceling One File at a Time