1. Left scale
Use to align originals on the exposure glass.
2. Main switch
Switches the copier between on and stand-by
conditions. ("stand-by" means that the optional
anticondensation heater is on.)
3. Copy tray
Completed copies are delivered here.
4. Paper tray1
This tray can hold 250 sheets of copy paper.
5. Paper tray2
This tray can hold 250 sheets of copy paper.
6. Platen cover
Lower this cover over originals for copying.
7. Exposure glass
Position originals here face down for copying.
8. Operation panel
Operator controls and indicators are located here.
9. Front cover
Open to access the inside of the copier.
10. 10-bin sorter (Option)
Completed copies are sorted or stacked here.
11. Document feeder
(Option)
Insert a stack of originals here. The originals are
individually fed onto and removed from the expo-
sure glass.
12. Bypass feed table
Use to copy onto paper of unusual size or
weight, or color paper.
13. Right Side Cover
Open to remove misfed papers.
14. Toner Bottle
Replace the toner bottle when the
f
Add Toner
indicator is lit.
15. Fusing Unit
Fuses the copy image to the paper. When ac-
cessing the inside of the copier, use caution.
This unit may be very hot.
gkf-ueg-2
WHERE IT IS & WHAT IT IS
3
To Next Page
Loading...
