Ricoh LD320d - Connecting to the IEEE 802.11 B (Wireless LAN) Interface

Connecting the Machine
12
1
Connecting to the IEEE 802.11b (Wireless LAN) Interface
Connect to the IEEE 802.11b (wireless LAN) interface.
Note
! Check the settings of the IPv4 address and subnet mask of this machine.
! For details about how to set the IPv4 address and subnet mask from the con-
trol panel of the machine, see "Interface Settings".
Reference
p.47 “Network”
Setup Procedure
Set up IEEE 802.11b (wireless LAN) according to the following procedure:
AME006S