Program Special Sender
111
4
Authorized RX (Authorized Reception)
Specify when programming a Special Sender.
A Select [Authorized RX] using {U} or {T}, and then press the {OK} key.
B Select [On] or [Off] using {U} or {T}, and then press the {OK} key.
Forwarding
Specify when programming a Special Sender.
Important
! One forward destination can be registered for each Special Sender. To register
two or more forward destinations, use group destinations. However a maxi-
mum of 100 destinations can be specified in a group.
A Select [Forwarding] using {U} or {T}, and then press the {OK} key.
B Select [On] or [Off] using {U} or {T}, and then press the {OK} key.
If you select [Off], proceed to step
D
.
To Next Page
Loading...
