13
Turning Off the Power
A Press the operation switch.
The On indicator goes off.
Note
r Even if you press the operation
switch, the indicator does not
go out, but blinks in the follow-
ing cases:
• During communication with
external equipment.
Turning Off the Main Power
Important
r Do not turn off the main power
switch when the On indicator is lit
or blinking. Doing so may result in
damage to the memory.
r Make sure 100% is shown as avail-
able memory on the initial scanner
display before turning off the main
power switch.
r Be sure to turn off the main power
switch before pulling out the pow-
er plug. Not doing this may result
in damage to the memory.
A Be sure the On indicator is not lit.
B Turn off the main power switch.
The main power indicator goes
out.
Saving Energy
-Auto Off/ Low Power
The machine automatically turns it-
self off when the job is finished, after
a certain period of time has elapsed.
This function is called “Auto Off”.
Note
r You can change the Auto Off time.
See General Settings Guide.
r The Auto Off Timer function will
not operate in the following cases:
• When a warning message ap-
pears
• When the service call message
appears
• When paper is jammed
• When the cover is open
• When the “
Add Toner” mes-
sage appears
• When toner is being replen-
ished
• When the User Tools screen is
displayed
• When fixed warm-up is in progress
• When the printer or other func-
tions are active
• When operations are suspend-
ed during printing
• When the Data In indicator is on
or blinking
rModes
ar/Stop
tart
APE030S