Ricoh LD320d - Changing the Paper Size in the Optional Paper Tray Unit

Troubleshooting
44
4
Changing the Paper Size in the
Optional Paper Tray Unit
A Make sure the paper tray is not in
use.
B Pull out the paper tray until it stops.
Note
r Remove any remaining copy
paper.
C While pinching the release lever,
adjust the back fence.
D Press down the release button.
E While pressing the release lever,
adjust the side fences.
F Square the paper and set it in the
tray.
Important
r Do not stack paper over the lim-
it mark.
G While pinching the release lever,
adjust the side and back fences to
the new paper size.
AAI034S