9
ENERGY STAR Program
•Low Power mode
This machine automatically lowers its power consumption 1 minute after fin-
ishing the last copy or print job. Fax reception and printing is still possible in
Low Power mode, but to make copies, you have to press the operation switch
first.
• Off mode (Copier only)
To conserve energy, this machine automatically turns off 1 minute after fin-
ishing the last copy or print job. In this manual, the Off mode is called the
Auto Off mode.
• Sleep mode (Fax, printer, or scanner installed)
If there is a fax, printer, or scanner unit installed, this machine automatically
lowers its power consumption even further 1 minute after finishing the last
copy or print job. Fax reception and printing is still possible in Sleep mode,
but to make copies, you have to press the operation switch first.
Note
❒ If you want to operate this machine while it is in either of these modes, do
one of the following:
• Turn on the operation switch.
• Place originals in the ADF or ARDF.
Reference
“Timer Settings”, General Settings Guide
• Duplex Priority (Type 2 only)
The ENERGY STAR Program recommends the duplex function. This function
is less of a burden to the environment. For applicable machines, duplex func-
tion (one-sided originals → two-sided copies) can be selected preferentially
when the operation switch or the {Clear Modes} key is pressed, or the machine
resets automatically.
As an ENERGY STAR Partner, we have determined
that this machine model meets the ENERGY STAR
Guidelines for energy efficiency.
The ENERGY STAR Guidelines intend to establish an international energy-saving system for
developing and introducing energy-efficient office equipment to deal with environmental is-
sues, such as global warming.
When a product meets the ENERGY STAR Guidelines for energy efficiency, the Partner shall
place the ENERGY STAR logo onto the machine model.
This product was designed to reduce the environmental impact associated with office equip-
ment by means of energy-saving features, such as Sleep mode.
To Next Page
Loading...
Need help?
General
