Ricoh LD320d User Manual

System Settings
42
2
Tray Paper Settings
This section describes the user tools in the Tray Paper Settings menu under Sys-
tem Settings.
Default settings are shown in bold type.
Important
! If the specified paper size differs from the actual size of the paper loaded in
the paper tray, a misfeed might occur because the correct paper size was not
detected.
" Paper Size: Tray 1-4
Select the size of the paper loaded in the paper tray 1.
If the paper size set for the selector in the paper tray is different to the paper
size for this setting, the paper size of the selector has priority.
If you load paper of a size not indicated on the paper size selector in the paper
tray, set the selector to "p".
•Type 1
The paper sizes you can set for Tray 1 are as follows:
A3L, A4K, A4L, A5K, B4 JISL, B5 JISK, B5 JISL, 11"×17"L,
8
1
/
2
"×14"L, 8
1
/
2
"×13"L, 8
1
/
2
"×11"K, 8
1
/
2
"×11"L, 8
1
/
4
"×14"L,
8
1
/
4
"×13"L, 8"×13"L, 7
1
/
4
"×10
1
/
2
"K, 7
1
/
4
"×10
1
/
2
"L, 5
1
/
2
"×8
1
/
2
"K,
8KL, 16KK, 16KL, Custom Size
The default setting is A4L.
You can specify a custom size as follows:
182.0 to 297.0 mm (7.17 to 11.69 inch) vertically, and 152.0 to 432.0 mm (5.99
to 17.00 inch) horizontally
The paper sizes you can set for Tray 2, 3 are as follows:
A3L, A4K, A4L, A5L, B4 JISL, B5 JISK, B5 JISL, 11"×17"L,
8
1
/
2
"×14"L, 8
1
/
2
"×13"L, 8
1
/
2
"×11"K, 8
1
/
2
"×11"L, 8
1
/
4
"×14"L,
8
1
/
4
"×13"L, 8"×13"L, 7
1
/
4
"×10
1
/
2
"K, 7
1
/
4
"×10
1
/
2
"L, 5
1
/
2
"×8
1
/
2
"L,
8KL, 16KK, 16KL, Custom Size
The default setting is A5L.
You can specify a custom size as follows:
182.0 to 297.0 mm (7.17 to 11.69 inch) vertically, and 152.0 to 432.0 mm (5.99
to 17.00 inch) horizontally

Ricoh LD320d Specifications

General

Brand	Ricoh
Model	LD320d
Category	All in One Printer
Language	English