B Loading Paper
45
3
B Loading Paper
Reference
For paper types and sizes, see Gen-
eral Settings Guide.
Loading Paper
Note
r You can change the paper size, see
General Settings Guide.
r This illustration shows the paper
trays (1 or 2).
A Pull the paper tray out slowly un-
til it stops.
B Square the paper and load it in
the tray.
Important
r Check the top of the stack is not
higher than the limit mark in-
side the tray.
Note
r Fan the paper before loading.
r Straighten curled or warped pa-
per before loading.
r When using paper tray 1 or 2,
before loading paper, push
down the metal plate.
C Push the paper tray in, until it
stops.
AAI022S
To Next Page
Loading...
