System Settings
62
2
C Select [Prog/Chnge/Del LDAP Server] using {U} or {T}, and then press the {OK}
key.
D Select [Program/Change] using {U} or {T}, and then press the {OK} key.
E Select the LDAP server you want to program or change using {U} or {T},
and then press the {OK} key.
When programming the server, select [*Not Programmed].
F Set each item as necessary.
G Press {OK} after setting each item.
For details about specifying the settings, see "Programming the LDAP Server".
H Press [Exit].
I Press the {User Tools/Counter} key.
Reference
p.64 “Programming the LDAP Server”
To Next Page
Loading...
