Registering Folders
219
7
Y Press the {User Tools/Counter} key.
Note
! To register the name, see Registering Names".
! You can enter up to 64 characters for the user name.
! If you select [NDS] for the connection type, after the user name, enter the con-
text name where the user object resides. If the user name is "user" and the
context name is "context", the user name you would enter is "user.context".
! You can enter up to 64 characters for the password.
! To specify a folder, you can either enter the path manually or locate the
folder by browsing the network.
! When [Do not Specify] is selected, the NCP User Name and NCP Password
that you have specified in Default User Name / Password (Send) of File
Transfer settings applies.
! If User Authentication is specified, contact your administrator.
Reference
p.140 “Registering Names”
p.219 “Locating the NCP folder manually”
p.220 “Locating the NCP folder using Browse Network”
"Entering Text", About This Machine
Locating the NCP folder manually
A Select [Manual Entry] using {U} or {T}, and then press the {OK} key.
B Enter the path name, and then press the {OK} key.
C Press [Com.Test] to check the path is set correctly.
To Next Page
Loading...
