User Tools (System Settings)
26
3
v Output: Copier (copier)
You can specify a tray to which documents are delivered.
Note
r Default: Internal tray 1
v Output: Printer (printer)
You can specify a tray to which documents are delivered.
Note
r Default: Internal tray 2
r The output trays set on the printer driver have priority over the output tray
specified above.
v Display Contrast
You can adjust the brightness of the display.
v Key Repeat
You can select whether or not to use the key repeat function.
Note
r Default: On
v Measurement Unit
You can switch the measurement between “mm” and “inch”.
Note
r Default:
•Metric version: mm
• Inch version: inch
Output tray settings
Limitation
r You cannot use the Internal tray 2 as the output tray when copying from the
bypass tray.
To Next Page
Loading...
