Item Description Value
System Reset
Timer
Sets the machine to return to
the mode specified in
[Function Priority].
This setting is also applied to
the timeout for copying the
next document while ID card
copy and manual 2-sided
copy is performed.
• Off
• 30 sec.
• 1 min.
• 2 min.
• 3 min.
• 5 min.
• 10 min.
Default: [1 min.]
Energy Saver
Mode
Sets the machine to enter
Energy Saver Mode 1 or
Energy Saver Mode 2, to
reduce power consumption.
The machine recovers from
Energy Saver Mode when it
receives a print job, prints a
received fax, or one of the
keys on the control panel is
pressed.
Regardless of the settings for
Energy Saver Mode 1 or
Energy Saver Mode 2, the
machine enters Energy Saver
Mode 1 after being idle for
30 seconds.
• Energy Saver Mode 1
The machine enters Energy Saver Mode 1 if
the machine has been idle for about 30
seconds. It takes less time to recover from
Energy Saver Mode 1 than from power-off
state or Energy Saver Mode 2, but power
consumption is higher in Energy Saver Mode
1 than in Energy Saver Mode 2.
• Off
• On
Default: [Off]
Administrator Tools Settings
253
To Next Page
Loading...
