Ricoh M C251FW - Page 256

Item Description Value
Energy Saver
Mode
Sets the machine to enter
Energy Saver Mode 1 or
Energy Saver Mode 2, to
reduce power consumption.
The machine recovers from
Energy Saver Mode when it
receives a print job, prints a
received fax, or one of the
keys on the control panel is
pressed.
Regardless of the settings for
Energy Saver Mode 1 or
Energy Saver Mode 2, the
machine enters Energy Saver
Mode 1 after being idle for
30 seconds.
• Energy Saver Mode 2
The machine enters Energy Saver Mode 2
after the period of time specified for this setting
is passed. The machine consumes less power
in Energy Saver Mode 2 than in Energy Saver
Mode 1, but it takes longer to recover from
Energy Saver Mode 2 than from Energy Saver
Mode 1.
1 to 60 minutes
Default: 1 minute
7. Configuring the Machine Using the Control Panel
254