Ricoh MLP150DN Operaing Instructions

BEK135S
4. Align the notch on the SDRAM module with the slot, and then carefully push in the SDRAM
module at an angle.
BEK138S
5. Holding the SDRAM module at an angle, press it down until it clicks into place.
BEK139S
6. When also installing the hard disk, install it before returning the controller board to the
printer.
Installing the Memory Expansion Units
31
2

Ricoh MLP150DN Specifications

General

Brand	Ricoh
Model	MLP150DN
Category	Printer
Language	English