Wait for two seconds. The display returns to the [WPA] menu.
8. Press the [ ] or [ ] key to select [Authentication Method], and then press the [OK] key.
9. Press the [ ] or [ ] key to select authentication method, and then press the [OK] key.
Authentication settings are as follows:
• [WPA-PSK]
Performs authentication using an encryption key (a Pre-Shared Key) that is shared by the access
point and client.
• [WPA]
WPA uses CA certificates and a RADIUS server to provide secure wireless communication.
• [WPA2-PSK]
As with WPA-PSK, authenticate using the encryption key (a Pre-Shared Key) shared by the access
point and client.
• [WPA2]
WPA2 is an expanded version of WPA that fully supports IEEE802.11i.
10. If [WPA] or [WPA2] is selected in step 9, a confirmation message appears. Press the [OK]
key.
Wait for two seconds. The display returns to the [WPA] menu.
11. If [WPA-PSK] or [WPA2-PSK] is selected in step 9, a confirmation message appears. Press
[Enter].
Setting Security Method of Wireless LAN
71
To Next Page
Loading...
Need help?
General
