4. Press [Immed. TX].
5. Place the original into the ADF.
6. Select the scan settings you require.
7. Specify a destination.
If you make a mistake, press [Clear], and then enter again.
8. Press [Start].
Procedure for Sending Originals Using the Exposure Glass (classic)
1. Press [Immed. TX].
2. Place the first page face down on the exposure glass.
3. Specify a destination.
4. Make the scan settings you require.
5. Press [Start].
6. Place the next original on the exposure glass within 10 seconds when you send multiple
originals, and then repeat Steps 4 and 5.
Repeat this step for each page.
4. Fax
98
To Next Page
Loading...
