Transmitting while Checking Connection to
Destination (Immediate Transmission)
Using Immediate Transmission, you can send documents while checking the connection to the
destination.
You can specify fax or IP-Fax destinations.
If you specify Internet Fax, e-mail, folder destinations, and group or multiple destinations, the
transmission mode is automatically switched to Memory Transmission.
• It is recommended that you call the receivers and confirm with them when sending important
documents.
When Using the Fax Application
About how to use the application's screen, see page 46 "[Fax] Screen".
When Using the Fax (Classic) Application
For details about how to use the classic fax function, see page 97 "Procedure for Sending
Originals Using the ADF (Classic)".
For details about how to use the classic fax function, see page 98 "Procedure for Sending
Originals Using the Exposure Glass (classic)".
Procedure for Sending Originals Using the ADF (Classic)
1. Press [Home] ( ) at the bottom of the screen in the center.
2. Flick the screen to the left, and then press the [Fax (Classic)] icon.
3. Make sure "Ready" appears on the screen.
Transmitting while Checking Connection to Destination (Immediate Transmission)
97
To Next Page
Loading...
Need help?
General
