Ricoh MP 7503 Series User Manual

Recommended Paper
Recommended Paper Sizes and Types
This section describes recommended paper sizes and types.
• If you use paper that curls, either because it is too dry or too damp, a staple clogging or paper jam
may occur.
• Do not use paper designed for inkjet printers, as these may stick to the fusing unit and cause a
misfeed.
• When you load OHP transparencies, check the front and back of the sheets, and place them
correctly, or a misfeed might occur.
Tray 1
Paper type and weight Paper size Paper capacity
52–256 g/m
2
(14 lb. Bond–
140 lb. Index)
Plain Paper–Thick Paper 3
A4
8
1
/
2
× 11
1,550 sheets × 2
52–256 g/m
2
(14 lb. Bond–
140 lb. Index)
Plain Paper–Thick Paper 3
*1
8
1
/
2
× 11
A4
1,550 sheets × 2
*1
To load paper any of the sizes specified above, contact your service representative.
Tray 1 (A3/11 × 17 tray unit)
Paper type and weight Paper size Paper capacity
52–169 g/m
2
(14–90 lb. Bond)
Plain Paper–Thick Paper 1
A3
11 × 17
1,000 sheets
9. Adding Paper and Toner
160

Ricoh MP 7503 Series Specifications

General

Print Resolution	1200 x 1200 dpi
Duplex Printing	Standard
Hard Disk Drive	320 GB (Optional)
Power Source	220-240V, 50/60Hz
Print Speed	75 ppm
Paper Capacity	Maximum: 8, 300 sheets
Connectivity	USB, Ethernet, Wi-Fi
Supported Paper Sizes	A3, A4, A5, B4, B5
First Print Speed	2.9 seconds
Memory (RAM)	2 GB
Supported Media Types	Plain paper, Recycled paper, Thick paper, Thin paper, Envelopes
Monthly Duty Cycle	300, 000 pages