Ricoh MP 7503 Series User Manual

Printing on Both Sides of Sheets
This section explains how to print on both sides of each page using the printer driver.
• The paper types that can be printed on both sides are as follows:
• Plain (52–81 g/m
2
), Recycled, Special, Middle Thick (82–103 g/m
2
), Thick 1 (104–169
g/m
2
), Thick 2 (170–216 g/m
2
), Thick 3 (217–256 g/m
2
), Translucent, Color 1, Color 2,
Letterhead, Preprinted, Prepunched, Bond
When Using the PCL 6 Printer Driver
1. Click the menu button of the application you are using, and then click [Print].
2. Select the printer you want to use.
3. Click [Preferences].
4. Click the [Frequently Used Settings] tab.
You can also click the [Detailed Settings] tab, and then click [2 Sided/Layout/Booklet] in the
"Menu:" box.
5. Select the method for binding the output pages in the "2 sided:" list.
6. Change any other print settings if necessary.
7. Click [OK].
8. Start printing from the application's [Print] dialog box.
Types of Two-sided Printing
You can select which way the bound pages open by specifying which edge to bind.
Orientation Open to Left Open to Top
Portrait
Landscape
5. Print
112

Ricoh MP 7503 Series Specifications

General

Print Resolution	1200 x 1200 dpi
Duplex Printing	Standard
Hard Disk Drive	320 GB (Optional)
Power Source	220-240V, 50/60Hz
Print Speed	75 ppm
Paper Capacity	Maximum: 8, 300 sheets
Connectivity	USB, Ethernet, Wi-Fi
Supported Paper Sizes	A3, A4, A5, B4, B5
First Print Speed	2.9 seconds
Memory (RAM)	2 GB
Supported Media Types	Plain paper, Recycled paper, Thick paper, Thin paper, Envelopes
Monthly Duty Cycle	300, 000 pages