Ricoh MP 7503 Series User Manual

7. Specify a user name, and then press [OK].
The user names shown are names that were registered in the Address Book. To specify a name not
shown in the screen, press [Manual Entry], and then enter a user name.
8. Press [File Name].
9. Enter a file name, and then press [OK].
10. Press [Password].
11. Enter a password with the number keys, and then press [OK].
You can use four to eight digits for the password.
12. For double-check, enter the password again, and then press [OK].
13. Place the original.
14. Specify the original scanning conditions.
15. Press [Start].
The original is scanned. The document is saved in the Document Server.
After scanning, a list of folders will be displayed. If the list does not appear, press [Finish Scanning].
7. Document Server
142

Ricoh MP 7503 Series Specifications

General

Print Resolution	1200 x 1200 dpi
Duplex Printing	Standard
Hard Disk Drive	320 GB (Optional)
Power Source	220-240V, 50/60Hz
Print Speed	75 ppm
Paper Capacity	Maximum: 8, 300 sheets
Connectivity	USB, Ethernet, Wi-Fi
Supported Paper Sizes	A3, A4, A5, B4, B5
First Print Speed	2.9 seconds
Memory (RAM)	2 GB
Supported Media Types	Plain paper, Recycled paper, Thick paper, Thin paper, Envelopes
Monthly Duty Cycle	300, 000 pages