Ricoh MP 7503 Series

Paper type and weight Paper size Paper capacity
OHP transparencies • When no finisher is
installed
A4 , 8
1
/
2
× 11
• When a finisher is
installed
A4
50 sheets
Translucent paper A3 , A4 , B4 JIS ,
B5 JIS
50 sheets
Label paper (adhesive labels) • When no finisher is
installed
B4 JIS , A4
• When a finisher is
installed
A4
1 sheet
*1
Select the paper size. For copier mode, see "Copying onto Regular Size Paper from the Bypass Tray",
Copy/ Document Server. For printer mode, see page 153 "Specifying regular sizes using the control
panel".
*2
Enter the paper size. For copier mode, see "Copying onto Custom Size Paper from the Bypass Tray",
Copy/ Document Server. For printer mode, see page 154 "Specifying a custom size paper using the
control panel".
*3
In printer or facsimile mode, the maximum horizontal length of the custom size is 1,260 mm (49.60
inches). If you want to print on paper with a vertical length of 600–1,260 mm (23.62–49.60 inches),
contact your service representative. If you want to load paper with a vertical length of 600 mm (23.52
inches) or longer in the bypass tray, it must have a horizontal width of 305 mm (12.1 inches) or less.
*4
When paper larger than 432 mm (17 inches) in size is used, the paper may become wrinkled, may not
be fed into the machine, or may cause paper jams.
*5
Printing on thick paper 1 - 4 of A5 is not supported.
9. Adding Paper and Toner
164