Ricoh MP C2003 Series User Manual

9. Press [Change].
10. Specify the range in which [Simple (Limitation)] is applied to "Printer Job Authentication".
You can specify the IPv4 address range to which this setting is applied, and whether or not to apply
the setting to the parallel and USB interfaces.
11. Press [Exit].
12. Press [
Next].
13. In "Available Functions", select which of the machine's functions you want to permit.
If the function you want to select is not displayed, press [ Next].
LDAP authentication will be applied to the selected functions.
Users can use the selected functions only.
2. Configuring User Authentication
56

Ricoh MP C2003 Series Specifications

General

Print Resolution	1200 x 1200 dpi
Maximum Paper Size	A3
Copy Resolution	600 x 600 dpi
Duplex Printing	Yes
Print Technology	Laser
Print Speed	20 ppm (A4)
Scanner Resolution	600 dpi
Network Connectivity	Ethernet
Functions	Print, Copy, Scan
Operating System Compatibility	Windows, Mac, Linux
Scan Speed	54 images per minute
Control Panel	9-inch color touchscreen