Ricoh MP C2003 Series User Manual

8. Enter the server name, and then press [OK].
Enter the IPv4 address or host name.
9. In "Authentication Type", select the authentication system for external authentication.
Select an available authentication system. For general usage, select [Default].
10. Press [Change] for "Domain Name".
11. Enter the domain name, and then press [OK].
You cannot specify a domain name under an authentication system that does not support domain
login.
12. Press [Obtain URL].
The machine obtains the URL of the server specified in "Server Name".
If "Server Name" or the setting for enabling SSL is changed after obtaining the URL, the URL is "Not
Obtained".
13. Press [Exit].
If you have not registered a group on the external authentication system being used, proceed to
step 20.
If you have registered a group, proceed to step 14.
If you set "Authentication Type" to [Windows (Native)] or [Windows (NT Compatible)], you can
use the global group.
Integration Server Authentication
59

Ricoh MP C2003 Series Specifications

General

Print Resolution	1200 x 1200 dpi
Maximum Paper Size	A3
Copy Resolution	600 x 600 dpi
Duplex Printing	Yes
Print Technology	Laser
Print Speed	20 ppm (A4)
Scanner Resolution	600 dpi
Network Connectivity	Ethernet
Functions	Print, Copy, Scan
Operating System Compatibility	Windows, Mac, Linux
Scan Speed	54 images per minute
Control Panel	9-inch color touchscreen