Ricoh MP CW2200SP User Manual

Message Causes Solutions
"Exceeded max. number of
pages of Document Server.
Cannot store."
The maximum page
capacity of the Document
Server was exceeded.
• Delete some of the files stored in
the Document Server.
• Reduce the number of pages to
send.
"Exceeded max. number of
pages to print for
temporary / stored jobs."
While printing a Sample
Print, Locked Print, Hold
Print, or Stored Print file, the
maximum page capacity
was exceeded.
• Delete unneeded files stored in
the machine.
• Reduce the number of pages to
print.
"Exceeded max. pages.
Collate is incomplete."
The number of pages
exceeds the maximum
number of sheets that you
can use Collate with.
Reduce the number of pages to print.
"Exceeded max. number of
pages. (Auto)"
While using the error job
store function to store
Normal Print jobs as Hold
Print files, the maximum
page capacity was
exceeded.
• Delete unneeded files stored in
the machine.
• Reduce the number of pages to
print.
"Failed to obtain file system." PDF direct printing could not
be performed because the
file system could not be
obtained.
Turn off the main power switch, and
then back on again. If the message
appears again, contact your service
representative.
"File system is full." PDF file does not print out
because the capacity of the
file system is full.
• Delete all unnecessary files from
the hard disk.
• Decrease the file size sent to the
machine.
"HDD is full." The hard disk became full
while printing a Sample
Print, Locked Print, Hold
Print, or Stored Print file.
• Delete unneeded files stored in
the machine.
• Reduce the data size of the
Sample Print, Locked Print, Hold
Print, or Stored Print file.
9. Troubleshooting
188

Ricoh MP CW2200SP Specifications

General

Brand	Ricoh
Model	MP CW2200SP
Category	Printer
Language	English