Clean Print-heads
Use this function to clean the print-heads if a specific color is not printing or prints out unclearly.
Perform this function on a color basis.
• Head cleaning consumes ink. Perform this function only when necessary.
• Perform no other operations during head cleaning.
• Head cleaning is not possible if even one color has run out.
• Cleaning may be incomplete if ink in a cartridge gets too low or runs out during cleaning.
• An error will occur and head cleaning will not be possible if:
• There is a misfeed.
• One of the machine's covers is open.
• The machine is performing maintenance operations.
• The machine has run out of ink.
• The machine has run out of paper.
1. Press the [User Tools/Counter] key.
2. Press [Maintenance].
3. Press [Clean Print-heads].
4. Select the color of the head you want to clean, and then press [Start].
Maintenance
165
To Next Page
Loading...
