Stopping originals from feeding in
If the originals are feeding in slanted, or jamming, etc., press the [Scanner Stop] key to stop them
feeding in.
Scanning an Original Using a Carrier Sheet
Use the carrier sheet when scanning originals such as originals drawn in pencil, and pasted originals.
For details, see "Originals That Should Be Scanned Using the Carrier Sheet", Paper Specifications and
Adding Paper .
• When using the carrier sheet, originals should be ejected onto the original output guides. If the
original is ejected onto the original stackers, it might be damaged. For details about how to eject
originals onto the original output guides, see "Ejecting originals onto the original output guides",
Paper Specifications and Adding Paper .
1. Open the carrier sheet with the transparent sheet face up, and then insert the original also
face up.
Align the original with the fold of the carrier sheet.
2. Getting Started
42
To Next Page
Loading...
