Ricoh PE-P1 - Page 119

Item Selections Remarks
Custom Size
unit
Mm */ Inch *
If the paper size factory default is A4,
then the custom size factory default unit
is mm.
If the paper size factory default is Letter,
then the custom size factory default unit
is inch.
Custom
Horizontal
90*-216mm
3.54 – 8.50 inch. Precision is two digits
after the decimal point in inch or one digit
after the decimal point in mm.
If an input value is more than the
maximum value, then it will be treated as
the maximum value.
If an input value is less than the minimum
value, then it will be treated as the
minimum value.
Custom
Vertical
148*-356mm
5.83 – 14.02 inch. Precision is two digits
after the decimal point in inch or one digit
after the decimal point in mm.
If an input value is more than the
maximum value, then it will be treated as
the maximum value.
If an input value is less than the minimum
value, then it will be treated as the
minimum value.
Priority Tray
MPT Not used
Tray1 *
-
Tray2
"*" indicates the factory default value.
5. Service Tables
118
5