Ricoh PE-P1 - Controller; Overview

Controller
Overview
The printer model has two types of controllers: GDI and PCL. The MF model has the main controller and
the extension PDL controller.
Controller: Printer model (G165/G166/G167)
CPU
195MHz (PE-P1a)
300MHz (PE-P1b/c)
RAM
Std.
64MB (PE-P1a)
128MB (PE-P1b/c)
Max.
64MB (PE-P1a)
384MB (PE-P1b/c)*1
Hard Disk Drive - -
PDL
PE-P1a: DDST (GDI)
PE-P1b/c: PCL5c/6, PostScript 3 emulation
Fonts Std.
PCL:
41 Symbolset, 35 Intellifonts, 10 TrueType fonts, 1
bitmap font.
PS3:
80 fonts (PE-P1b/c)
Connectivity
Host
Interface
Std.
USB2.0, 100BASE-TX/10BASE-T Ethernet, Pict Bridge
(PE-P1c)
Option Non
Network Protocol
TCP/IP (PE-P1a)
TCP/IP, AppleTalk (PE-P1b/c)
MIB
support
Private MIB
Standard
MIB
MIB-II (RFC1213), HostResource (RFC1514),
PrinterMib (RFC1759)
6. Detailed Section Descriptions
200
6