Ricoh PE-P1 - Waste Toner Overflow Sensor

• When reinstalling the waste toner bottle set sensor, connect it to the white connector of the harness.
Waste Toner Overflow Sensor
1. Remove all AIOs. (* AIO Cartridge)
2. Image transfer belt unit (*Image Transfer Belt Unit)
3. EGB (* EGB)
4. Waste toner sensor base (* Waste Toner Bottle Set Sensor)
5. Waste toner overflow sensor [A] (hooks,  x 1)
• When reinstalling the waste toner overflow sensor, connect it to the black connector of the harness.
3. Replacement and Adjustment
42
3