Ricoh PE-P1 - Page 125

Group (Tab) Item Selections Remarks
If this setting is changed, the printer power must
be turned off/on for the new setting to take
effect.
Will show all zero if network initialization is not
finished. Any change will be ignored before the
end of network initialization.
The default setting is "255.255.255.0" when
DHCP is off.
Gateway
address
xxx.xxx.xxx.xxx
This setting is not available if DHCP is enabled.
If this setting is changed, the printer power must
be turned off/on for the new setting to take
effect.
Will show all zero if network initialization is not
finished. Any change will be ignored before the
end of network initialization.
The default setting is "192.0.0.192" when
DHCP is off.
DHCP On */ Off
If this setting is changed, the printer power must
be turned off/on for the new setting to take
effect.
DNS Server IP
Address
xxx.xxx.xxx.xxx
Up to 32 alphanumeric characters. This setting
is not available if DHCP is enabled.
The default setting is "0.0.0.0"when DHCP is off.
The setting when DHCP is changed from on to
off is the previous setting when DHCP was on.
If this setting is changed, the printer power must
be turned off/on for the new setting to take
effect.
DNS Domain
Name
Up to 32 alphanumeric characters. This setting
is not available if DHCP is enabled. The default
setting when DHCP is off is null string.
The setting when DHCP is changed from on to
off is the previous setting when DHCP was on.
5. Service Tables
124
5