EasyManua.ls Logo

Ricoh PE-P1 - Page 129

Ricoh PE-P1
225 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Network 3
Group
(Tab)
Item Selections Remarks
SNMP
Community
Name
Null string *
Up to 15 alphanumeric characters.
The factory default is 'null string'.
Host IP Address 0.0.0.0 *
The factory default is 0.0.0.0
If this setting is changed, the printer power
must be turned off/on for the new setting to
take effect.
Host IPX
Address
"FFFFFFFFFFFFFFFFFFFF" *
PCL only. String length is 20.
The factory default is 20 "F" characters.
Valid characters are:
"0123456789ABCDEFabcdef"; not case
sensitive when setting but the capital
character will change to lower case when
reading.
If this setting is changed, the printer power
must be turned off/on for the new setting to
take effect.
A valid string length is 0 or 20. String lengths
of 1 19 will cause the setting to be invalid.
5. Service Tables
128
5

Table of Contents

Related product manuals