Ricoh PE-P1 - Page 136

Item Selections Remarks
LSU Adjustment Input 160 bytes setting.
Character: alphanumeric "0-9", "a-f", "A-
F", only valid data can be input.
Input length: 160 bytes
Color Registration
button
The engine will do color registration and
density tuning automatically.
The printer will warm up automatically after
this setting is changed.
2nd Transfer Front / Back
Media type
Display string only
0: Plain paper 1 mode
1: Plain paper 2 mode
2: Plain paper 3 mode
3: Reserved (not display)
4: Thick stock 1 mode
5: Thick stock 2 mode
6: Thick stock 3 mode (Not
used)
7: Thick stock 4 mode
8: Envelope 1 mode
Please select the media type.
Front (-15 to +15)
This adjusts the transfer roller current, based
on the default value.
The range of adjustment is from -15 [μA] to
+15 [μA], in units of 1.
The printer will warm up automatically after
this setting is changed.
Back (-15 to +15)
This adjusts the transfer roller current, based
on the default value.
The range of adjustment is from -15 [μA] to
+15 [μA], in units of 1.
Printer will warm up automatically after this
setting is changed.
Smart Organizing Monitor (Printer Model)
135
5